We are pleased to present you our new wind generator IstaBreeze® AIR Speed, universally applicable for light, medium and strong wind
The newly developed IstaBreeze® AIR Speed is a wind generator for long-term professional use, which delivers reliable energy even under extreme conditions automatically and unattended with our intelligent hybrid charge controller.
The generous dimensioning of the generator components and the heat dissipation via the newly developed aluminum housing and aluminum body ensure a low thermal load, which ensures a long service life even at high ambient temperatures.
The generator shaft runs in two encapsulated and permanently lubricated deep groove ball bearings made of stainless steel. At the front bearing, a special friction-free sealing disc prevents the ingress of moisture and dust.
The threading of the copper winding of the generator is done exclusively by hand.
The supplied i / HCC 650 wind / solar hybrid controller from IstaBreeze® is also suitable for parallel use
from 2-phase photovoltaic modules (DC) to max. 150 watts suitable.
· Microchip controlled
· Aluminum casing
· LEDs for display: charging / battery connected / battery full
· Control the charging process to protect the battery from overcharging
· Braking the wind generator at too high wind speeds
. This makes it possible to use wind generator power and solar module power for charging batteries.
FEATURES OF AIR SPEED MAST ADAPTER:
- Clamp Connection (Wind Turbine): 53mm
- Connector: 36.9 mm
- Material: Steel (galvanized)
- Total Height: 140mm
- Weight: 1.7 Kg
BLADE SPECIFICATIONS:
- Weight: 180 Gr
- Width: 10 cm
- Noise : 40 dB
- Blade Material:Carbon
- Blade Length:55 cm
- Rotor Diameter:115 cm
PRODUCT FEATURES - WIND TURBINE:
- Current : 40A (12V) - 20A (24V)
- Generator Body: Aluminium
- Body Matarial: Aluminium
- Maximum Power: 450 W
- Average Power: 420 W
- Voltage: 12V-AC / 24V-AC
- Package Dimensions: 70 x 30 x 20 cm (7Kg)
WIND SPEED:
- Initial Wind Speed: 3 m/s
- Maximum Wind Speed: 15-16 m/s
PACKAGE CONTENT:
- Connection Screws: 1 Set
- Nose: 1 Pcs
- Flange: 1 Pcs
- Body: 1 Pcs
- Blades: 3 Pcs
- Manual Book: 1 Pcs
- Charge Controller: 1 Pcs
- Tower: Optionally ( with Adapter)
NECESSARY EQUIPMENTS:
- Battery: Suitable battery group: Min 1800W - Max 2400W
CHARGE CONTROLLER MODEL 650 HYBRID: 12V
- Nominal output power: 650W
- Input voltage range: 12 ~ 16V
- Battery: 12V
- Max. Input wind power: 500W
- Max. Input solar PV: 150W
- Overcharge protection: 14,9V ± 0.5V AH
- Recommended battery: Min. 1800W - Max. 2400W
- Wind turbine Max. Input current: 40 A
- Protection function: When the battery is sufficiently charged, automatic braking is activated. However, manual braking is required in stormy weather.
- Weight: 0,6 kg
CHARGE CONTROLLER MODEL 650 HYBRID: 24V
- Nominal output power: 650W
- Input voltage range: 24 ~ 28V
- Battery: 24v
- Max. Input wind power: 500W
- Max. Input solar PV: 150W
- Overcharge protection: 29V ± 0.5V AH
- Recommended battery: Min. 1800W - Max. 2400W
- Wind turbine Max. Input current: 20 A
- Protection function: When the battery is sufficiently charged, automatic braking is activated. However, manual braking is required in stormy weather.
- Size: 140 x 120 x60 mm
- Weight: 0,6 kg
TOWER SET DETAILS:
- Fasteners : 3 Rope Tensioner and Bolt Set
- Steel Rope: 3 X 5m
- Mast: 4 Galvanized Poles
- Outer Diameter:42 mm
- Inner Diameter: 37 mm
- Plate: 1 piece Galvanized hinged plate
- Length: 4 m
- Mast Wall Thickness: 3 mm