MODEL i/HCC - 1000 HYBRID: 24V or 48V
The Wind / Solar Hybrid Charge Controller from IstaBreeze® is an intelligent controller of the wind turbine and solar cells that controls you at the same time. The high-end device thus controls your island system. It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination.
With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses. This version of the controller will significantly increase the life and stability of the whole system, especially the batteries.
The specific features and product information are listed below:
- Use of solid-state components. Increasing the life of the controller.
- Microprocessor controlled charge with integrated voltage and current limiting.
- Electromagnetic brake control, generator is automatically braked gently when fully charged, modern braking system in three steps to avoid the immediate locking of the turbine. Increasing the life of the stator.
- Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity.
- USB port with the possibility of an external display.
MODEL i/HCC - 1000 HYBRID: 12V-24V FEATURES
HYBRID CHARGE CONTROLLER
|NOMINAL BATTERY VOLTAGE||24 VDC||48 VDC|
|MAXIMUM INPUT POWER WIND TURBINE||35 AMP||18 AMP|
|MAXIMUM CHARGING VOLTAGE||29,2 V||59,6 V|
|MINIMUM BATTERY VOLTAGE||17,5 V||42 V|
|BRAKING FUNCTION (ELECTROMAGNETIC SHORT CIRCUIT, WIND TURBINE IS GRADUALLY BRAKED TO COMPLETE STYLE.)||FROM 29,2V||FROM 59,6V|
|OPERATING TEMPERATURE|| NORMAL: 20 ~ + 55 ° C / 35 ~ 85% RH
INDUSTRIAL: 30 ~ + 55 ° C / 35 ~ 85% RH
|TEMPERATURE COMPENSATION|| -4mV ° C / 2V, -35 ° C--
+ 80 ° C, ACCURACY: ± 1 ° C