Kit i-700W 48V Wind Turbine & Hybrid Charge Controller & Tower

$800.00
(No reviews yet) Write a Review
SKU:
2025/3b-2002(48)-2158
Condition:
New
Body Support Element:
Die-cast aluminum (powder-coated)
Generator:
Aluminum profile (powder coated)
Voltage:
48 V (AC)
Rated Power:
700W
Current:
Max 13A
Nominal Output Power:
850W
Battery:
48V
Max. Input Wind Energy:
700W
Max. Solar PV Input:
150W
Overload Protection:
59V
Wind Turbine Max. Input Current:
17A
Protection Function:
Over-charging the automatic brake during the storm

Wind Generator Original IstaBreeze® i-700 / 48V Now you get a set with hybrid charge controller


Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The housing is made of aluminum, which guarantees optimal cooling of the generator.

The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.

Installation in mast tube by plug connection. Required mast tube nominal diameter: 37mm nominal size!

Further technical data further down in the description.

Matching charge controllers and masts can be found in our shop!

 

Blade Specifications:

 

     
  • Material: Plastic + 30% glass fibers
  •  
  • Lenght of per blade: 90 cm
  •  
  • Noise: 40 dB
  •  
  • Weight of per blade: 620 g
  •  
  • Rotor Diameter: 190 cm

 

MAST/TOWER SPECIFICATION

4 meters IstaBreeze® TOWER for wind generator i-700 to i-2000,

(our WindSafe models require an adapter)


It has never been so easy to install a wind generator.

With the IstaBreeze® Tower it is possible to build a wind generator in a few minutes.

The folding system simplifies the whole process.

During maintenance, only a few screws are released and the tower can be folded for maintenance.

The mast can be extended by a maximum of 2 meters!

Dowels and screws for the floor (concrete floor) is still needed !!

Diameter of the mast is: 60 mm

Inner hole, plug connection Wind generator IstaBreeze® .......... 37 mm

 

Optional The vibration damper for the wind generators i-500- L-500 and i-700 to i-2000, reduces the transmission of structure-borne noise from the wind generator into the mast and thus possibly into the house. The retrofit is very simple, because the body silencer has the same dimensions as the wind generator, it must only be inserted between them and screwed with matching screws on the mast and the wind generator. (Not for WindSafe models)

The vibration damper is compatible with our original IstaBreeze® masts 15kg and 40kg.

 

YOU CAN SEE PERFORMANCE CHART -->

 

2 Year Warranty