Important Notice for Our Valued Customers
While many small wind turbines are widely offered on the market, some are advertised with unrealistic power ratings of 3000–4000 Watts—often at extremely low prices. Please be aware that such claims do not reflect actual performance under real-world wind conditions.
To avoid disappointment, we strongly advise you to carefully review the product specifications and ensure that the system you are considering truly meets your energy needs. Making an informed and responsible choice is essential for investing in a reliable, efficient, and long-lasting wind power solution.
Original wind generator iSTA Breeze i-1000
5 BLADE VERSION IS RECOMMEND ONLY FOR LOW WIND AREAS
Note:
Carbon rotor blades are stable, do not bend in strong winds, and can increase the performance of your wind turbines by up to 30%. The carbon set is available as an option.
Important:
Five rotor blades are ideal for wind regions with low average wind speeds. We recommend these for slightly windy areas. Please note that there may be a performance loss of up to 35% compared to the maximum output.
Extremely robust wind generator of the latest generation.
Made from fiberglass-reinforced plastic, the rotor blades are very durable and stable and at the same time unusually light.
The housing is equipped with cooling fins and is made of high-strength aluminum.
The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.
Installation in mast tube by plug connection. Required mast tube inner diameter: 37 mm nominal size!
Further technical data further down in the description.
This product is used successfully 1000 times worldwide!
Matching charge controllers and masts can be found in our shop!
Can also be used in combination with photovoltaic solar cells with our 48 volt hybrid charge controller.
MAST/TOWER SPECIFICATION
Thanks to the specially designed galvanized stainless steel tensioned pole, the installation of wind turbines is now very easy. Thanks to its hinged system, one person can easily install it and easily remove the turbine whenever they want.
The pole set consists of four one-meter pipes, a hinged lower phalanx, three steel ropes and nine tensioning devices.
It can also be extended up to a maximum of 10 meters by adding one-meter additional pipes upon request.
PRODUCT FEATURES - WIND TURBINE:
- Current : 40A (24V) - 20A (48V)
- Rated Power: 1000W
- Body Matarial: Aluminium- Casting
- Alternator Body: Aluminium
- Maximum Power: 1200 W
- Voltage: 24V-AC / 48V-AC
- Package Dimensions: 1.Package: 60 x 40 x 30 cm (17,5 kg) 2.Package: 110 x 19 x 12 cm (3,5 kg) Totaly: 21 kg
WIND SPEED:
- Initial Wind Speed: 3 m/s
- Maximum Wind Speed: 14-15 m/s
BLADE SPECIFICATIONS:
- Weight: 650 Gr (Composite) 770 Gr (Carbon)
- Width: 14.3 cm
- Noise : 40 dB (Carbon), 50 dB (Composite)
- Blade Material: Composite or Carbon
- Blade Length:107 cm
- Rotor Diameter:220 cm
TOWER SET:
- Fasteners : 3 Rope Tensioner and Bolt Set
- Steel Rope: 3 X 5m
- Mast: 4 Galvanized Poles
- Outer Diameter: 60 mm
- Inner Diameter: 37 mm
- Plate: 1 piece Galvanized hinged plate
- Length: 4 m
- Mast Wall Thickness: 3 mm
NECESSARY EQUIPMENTS:
- Battery: Suitable battery group: Min 3600W - Max 7200W
PACKAGE CONTENT:
- Connection Screws: 1 Set
- Nose: 1 Pcs
- Flange: 1 Pcs
- Generator: 1 Pcs
- Blades: 3 Pcs or 5 Pcs
- Manual Book: 1 Pcs
- Tail - Tail Pipe: 1 Pcs
- Charge Controller: 1 Pcs
- Tower: Optionally
