Kit i-2000W 48V Windsafe Wind Turbine + Hybrid Charge Controller

$1,500.00
(No reviews yet) Write a Review
SKU:
5218 / 2330
Alternator Housing:
Aluminium
Direction Flag:
Plastic + 30% glass fiber
Generator:
3-phase permanent magnet (High efficiency due to strong permanent magnets (NdFeB magnets, 150 ° temperature resistant) (The threading of our copper winding is done exclusively by hand.)
Current:
40A
Rated Capacity:
2 kw
System Voltage:
48V
Power Transmission:
Slip ring, thus no twisting of the cable possible. (pre-assembled in the supporting element)
Battery Voltage Min:
42V
Cable:
10 qmm screw terminals
Charging current PV Ampere max.:
10A
Charging current wind amperes max.:
33A
Charging Voltage:
52,8V
Cooling:
External aluminum cooling fins
Display:
LCD with 6 displays Amper, Watts, RPM, battery voltage, volts, temperature.
Dump Load:
2.0 KW braking resistor (3.6 ohms) The load resistor can deviate from the picture.
Integrated manual stop switch:
Maintenance
Protection Class:
IP20 (inside area)
Nominal Battery Voltage:
48 VDC
Max. Input Power of Wind Turbine:
2 KW
Max. Input Power of PV Module:
300W
Braking function (electromagnetic short-circuit, ):
From 59,4V
Operating Temperature:
Normal: 20~+55°C/35~85%RH Industrial: 30~+55°C/35~85%RH
Temperature Compensation:
-4mV°C/2V, -35°C-- +80°C, Accuracy: ±1°C
Recommended Battery Min.:
Acid & Gel

Expected release date is Mar 10th 2020

DESCRIPTION - WIND TURBINE

We are pleased to introduce our new wind generator IstaBreeze® WindSafe.

The newly developed IstaBreeze® WindSafe is a wind generator for long-term professional use, which delivers energy automatically and unattended reliably even under extreme conditions.

Our WindSafe's aBreeze® wind turbine model has a revolutionary turbine protection system, the rotor is supported on a movable platform that raises the entire structure by 90 degrees during windstorm or strong wind, thereby modifying the repeller in relation to the wind, reducing frontal attack and rotation is reduced. This protects the turbine from hurricanes or strong winds. This robust construction ensures a long lifetime of our turbines and becomes a unique system in the category of mini wind generators.

 

The generous dimensioning of the generator components and the heat dissipation through the grooves in the aluminum housing of the generator ensure a low thermal load, which ensures a long service life even at high ambient temperatures.

 

DESCRIPTION - HYBRID CHARGE CONTROLLER

The Wind / Solar Hybrid Charge Controller from IstaBreeze® is an intelligent controller of the wind turbine and solar cells that controls you at the same time. The high-end device can also be used as a monitoring system. It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination.

With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses. This version of the controller will significantly increase the life and stability of the whole system, especially the batteries.

In addition, the control electronics in the control cabinet monitors system voltage and brakes the wind turbine when reaching a max. Overvoltage.

 

The special features and product information are listed below:

Use of external and high quality (Triacs & Hyper Mosfet), solid state components. Increasing the life of the controller.

Microprocessor controlled charge with integrated voltage and current limiting.

Electromagnetic brake control.

Integrated 3-phase short-circuit switches (brake switch)

Protection against lightning strikes.

Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity.

Integrated display.

The generator is automatically braked gently when the battery is full, modern braking system with external load resistance (Dump Load) to avoid immediate blockage of the turbine. Increasing the life of the stator.

 

BLADE SPECIFICATION:

Diameter: 225 cm

Weight: 260 gr (Per Blade)

Material: Plastic + 30% Fiber Glass

Lenght: 107 cm

Noise: 40 dB

 

YOU CAN SEE PERFORMANCE CHART -->

YOU CAN SEE CONNECTION SCHEMA -->

MAST CONNECTION FLANGE IS NOT INCLUDE