Kit Heli 2KW 48V Off-Grid Wind Turbine & Hybrid Charge Controller

$2,150.00
(No reviews yet) Write a Review
SKU:
2400-2330
Condition:
New
Automatic Storm Securing:
13 m/s (by tilting the rotor)
Casing:
Hand Laminated and painted
Cut-In:
2,9 m/s
Direction:
Any
Efficiency:
92%
Generator:
3-phase permanent magnet (High efficiency due to strong permanent magnets (NdFeBo magnets, 150 ° temperature resistant)
Weight:
22 kg
Manual Storm Securing:
Switch (Short Brake)
Power Transmission:
Slip ring, thus no twisting of the cable possible. (pre-assembled in the supporting element)
Speed Range:
0 Rpm - 800 Rpm
Voltage:
48 VAC
Wear Element:
Powder-Coated steel
Rated Power:
2,0 KW
Work Space:
150 Rpm – 600 Rpm (Low Rpm Wind Turbine)
Minimum Battery Voltage:
42V
Cable:
10 qmm screw terminals
Maximum Charging Current PV Ampere:
10 A
Maximum Charging Current Wind Amperes:
33 A
Charging Voltage:
52,8V
Cooling:
External Aluminum Cooling fins
Display:
LCD with 6 displays Amper, Watts, Rpm, Battery Voltage, Volts, Temperature
Dump Load:
2.0 KW braking resistor (3.6 ohms) The load resistor can deviate from the picture
Integrated manual stop switch:
Maintenance
Protection Class:
IP20 (inside area)
Nominal Battery Voltage:
48 VDC
Max. Input Power of Wind Turbine:
2,0 KW
Max. Input Power of PV Module:
300W
Braking Function (Electromagnetic short-circuit):
From 59,4V
Operating Temperature:
Normal: 20~+55°C/35~85%RH Industrial: 30~+55°C/35~85%RH
Temperature Compensation:
-4mV°C/2V, -35°C-- +80°C, Accuracy: ±1°C
Recommended Battery Min:
Acid & Gel

Expected release date is Mar 10th 2020

We are pleased to introduce our new wind generator IstaBreeze® helicopter series.

The newly developed IstaBreeze® Heli 2.0 is a wind generator for long-term professional use, which delivers reliable energy even under extreme conditions automatically

The generous dimensioning of the generator components and the heat dissipation through the grooves in the nacelle housing ensure a low thermal load, which ensures a long service life even at high ambient temperatures.

The generator shaft runs in permanently lubricated, robust deep groove ball bearings made of stainless steel. The carrying element of the heli series is equipped with azimuth pivot bearings.

(The threading of the copper winding is done exclusively by hand.) 

 

 

BLADE SPECIFICATION

  • Material: Carbon Fiber (Extremely stiff and quiet)
  • Noise: 40 dB
  • Weight of per blade: 600 g
  • Rotor Diameter: 225 cm

 

YOU CAN SEE PERFORMANCE CHART -->

YOU CAN SEE CONNECTION SCHEMA -->

2 Year Warranty