Hybrid Charge Controller 24V 1500W for Wind Turbine Generator

$649.00
(No reviews yet) Write a Review
SKU:
2329
UPC:
0762743835911
Availability:
Immediate shipment upon receipt of payment until 2 pm o'clock
Minimum Purchase:
1 unit
Nominal Battery Voltage:
24 VDC
Maximum Input Power Wind Turbine:
1.5 KW
Charging Voltage:
25,2V

MODEL HYBRID 1500 W 24V DESCRIPTION

 

The Wind / Solar Hybrid Charge Controller from IstaBreeze® is an intelligent controller of the wind turbine and solar cells that controls you at the same time. The high-end device can also be used as a monitoring system. It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination.

With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses. This version of the controller will significantly increase the life and stability of the whole system, especially the batteries.

In addition, the control electronics in the control cabinet monitors system voltage and brakes the wind turbine when reaching a max. Overvoltage.

 

The special features and product information are listed below:

Use of external and high quality (Triacs & Hyper Mosfet), solid state components. Increasing the life of the controller.

Microprocessor controlled charge with integrated voltage and current limiting.

Electromagnetic brake control.

Integrated 3-phase short-circuit switches (brake switch)

Protection against lightning strikes.

Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity.

Integrated display.

The generator is automatically braked gently when the battery is full, modern braking system with external load resistance (Dump Load) to avoid immediate blockage of the turbine. Increasing the life of the stator.

 

MODEL HYBRID 1500 W 24V FEATURES

 

  • Maximum input power PV module: 300W
  • Display: LCD with multiple displays Amper, watts, battery voltage, volts.
  • Charging current wind amperes max.: 55 amps
  • Charging current PV Ampere max.: 10 amps
  • Integrated manual stop switch: Maintenance
  • Battery Voltage minimum: 17.5V
  • Brake Function: (electromagnetic short circuit, wind turbine.):From 29,6V
  • Cooling: External aluminum cooling fins
  • Cable: 10 qmm screw terminals
  • Protection Class: IP 20 (inside area)
  • Dump load: 1.5 KW brake resistor (2.0 Ohms) ( Optional Order )
  • Operating Temperature: Normal: 20 ~ + 55 ° C / 35 ~ 85% RH Industrial: 30 ~ + 55 ° C / 35 ~ 85% RH
  • Temperature Compensation: -4mV ° C / 2V, -35 ° C-- + 80 ° C, accuracy: ± 1 ° C
  • Dimensions: LxWxH 300x400x200mm

 

 

 

CONNECTION SCHEMA please click here

 

INSTRUCTION BOOK please click here

 

2 Year Warranty